Prestacycle

Prestaflator Pro Bicycle Tire Inflator – Presta & Schrader Air Compressor Tool
Loading store availability...
Prestacycle
NEW PATENTED PRO Presta Head
Our new pro Presta head offers a Patented auto-lock mechanism. As you slide the head onto the Presta valve, the mechanism grabs onto the Presta pin without pulling or twisting. A seal is made on the Presta valve WITHOUT clamping the valve. Easy-grip sides make it simple to press the red button on the top of the head which provides full release of the connection without pulling on the valve or the core. Instant no-loss disconnect insures tire pressure is exactly what you put in there.
Designed for professional use
Prestacycle Pro Presta Head uses a Steel head for protection against drops. 90 degree angle makes accessing Presta valves simple and makes it easy to use the oversized release button.
The original – Prestaflator!
The Prestaflator is designed with a long-throw trigger valve. Use a light squeeze or brief, rapid shots to gently inflate Bike tires to your desired pressure over a few seconds. A full squeeze on the trigger provides maximum pressure for seating tubeless tires. The dial pressure gauge lets you follow your progress visually. Designed for MTB & Road tires with a wide range of pressure requirements.
1way / 2way Presta Inflation Head inside.
Inside the Prestaflator head is our 1 way / 2 way Spin-on Presta design for inflating and deflating tires with traditional Presta valves. A few quick turns secures the head to the cap threads on the Presta valve and provides an air-tight seal. It has an internal sliding-action. Push the hose towards the head to push the Presta valve air release button without removing the head. This allows the Prestaflator to take a tire pressure reading without being connected to an Air Compressor. It can also let air out of the tire by simultaneously pushing the hose and pressing the air release button on the side of the Prestaflator handle. When you inflate or take a pressure reading, the head automatically slides back away from the Presta button. This returns the Presta valve to it’s natural one-way operation. This means there’s absolutely NO pressure loss when you disconnect the head from the tire.
The best accessories are included to make it a multi-purpose tool:
Remove the cap to screw-on Prestaflator accessory heads quickly without tools.
-Schrader Auto Head
-Pro Presta Head
-Safety Blower Tip
SPECIFICATIONS
-Machined Brass internals for superior inflation accuracy
-Large 2 ¼” / 6 cm dial pressure gauge.
-174 PSI (in 2 PSI increments).
-12 Bar (in 0.1 Bar increments).
-Works as a pressure checker w/ 2way head.
-Variable-rate trigger!
-Presta AND Schrader!
-Professional shop-grade tool.
-6061-T6 Alloy Presta Head.
-Replaceable I/M compressor quick-release attachment.
-Rubber pressure gauge housing for shock protection.
-Cast aluminum pistol grip handle with bead-blasted finish.
-Two-finger trigger valve for precise air flow regulation.
-Thumb-control pressure release button.
-High-pressure hose for easy access on any wheel.
-Head accepts many thread-on accessory Heads.
Prestaflator is different… a high quality, serviceable tool… designed, built and warranted for use on Bicycles.
Join our insider list. We’ll email your code and auto-apply it to your cart. *Discount taken at checkout. Cannot be combined with select price-restricted items. See cart for details. Bikes and sale items are excluded.
This is my second CoolCave Pannier because I destroyed the first one (More on that later slow).
This is a creat solution for carrying things you might not want to put in a soft bag such as tools, muddy boots, etc. I had a large u-lock tear through the bottom of a soft pannier a year ago and that is what got me looking for something like this.
I commute to work every day outside of the darkest days of winter and I have found that I can just dump my normal bike bag (Ortlieb Back Roller Plus) into this bag and pull it out when I get to work fast and easy. That way I only have one large protrusion sticking off the back of the bike instead of two. if I need to stop at the store on the way home I just pull the pannier out of the CoolCave, clip it on to the other side of the bike and dump my shopping in. This bag is big, easy to clean inside and out with a hose and it goes on and off the bike in a few seconds.
What’s not to like? Well, since you asked… The ascetic is pretty much like you took the trash bin fron under your desk and strapped it to your bike. I can see that would not be for everyone.
It catch’s a lot of wind at higher speeds. or when it is windy.
Finally, it is not quite as r=tough as you might think as I had to replace mine because I hit it on a steel bollard (Concrete filled metal pipe) swerving to avoid running over someone sleeping on the sidewalk. The bag hit the bollard and exploded, literally tearing itself in half and fracturing all over. I was not super happy about this in the moment (or the person sleeping on the sidewalk) but in hindsight it is not entirely a down-side as if the bag had held together it probably would have instantly stopped the bike nad sent me over the handlebars, or clothes-lined me on the bars, or worse yet, it could have pretty easily have deflected me into traffic. So, I like to think the bag sacrificed me to save me from my poor swerving skills.
I have seen reviews where they complained about the bag being noisy, but the only noice I have experienced is a little rattling on rough surfaces when the bag is empty. Most of the time I don’t hear it at all.
I also want to mention that while this bag is sold as an accessory for the Specialized GlobeHaul cargo bike, I am using it on an Lectric Xpress 750 with standard pannier racks and it fits and works with the included hardware.
I think this is not for everyone, but if you need an option to carry stuff that might not work in your soft pannier or backpack, this might be what you are looking for.
Works pertect!
Went with the rival setup instead of force and I am super happy that I did. If you don’t need the extra button on the hoods, these are probably the best value item in the AXS drivetrain.
Smooth, fast, and honestly impressive service in this day and age. Thanks Sierra, ya’ll rock!
Just perfect ítems ! Very honest!
from the color to the style and the fit! Perfect!
The S-Works Prevail 3 is one of the most comfortable bike helmets I’ve worn. The fit system adjusts perfectly, and once I ratchet the MIPS cradle to my head, the helmet almost disappears — it conforms so well that I barely notice I’m wearing it.
Ventilation is excellent. Riding in moderate weather around the mid-70s, my head stayed cool and comfortable without overheating. The airflow design really works.
Thankfully, I haven’t had to test the helmet in a crash, and I hope I never do. But the build quality and design give me a lot of confidence in the protection it offers. Highly recommended.
Very impressed by the whole experience with Sierra Bicycle Supply! The frameset was just as shown - brand new and gorgeous. It shipped fast with tracking info. Great pricing on the frameset and I picked up other stuff for my build. Great overall experience - highly recommended!!
Amazing bike at super price. Free shipping. Highly recommend buying from these guys.